• Submit An Enquiry
  • Open a Trade Account

Victaulic Hole Cut Piping System

Victaulic Hole Cut Piping System View Large Image
TVICFIT3

We Stock Victaulic Mechanical Tees for both sprinker and mechanical applications.

Victaulic Mechanical-T® Outlet provides a direct branch connection at any location a hole can be cut in pipe. The hole is cut oversize to receive a “holefinder” locating collar which secures the outlet in position permanently.

A pressure responsive gasket seals on the pipe O.D.

Cross-type connections can be achieved by utilizing two upper housings of the same style and size, with the same or differing branch size connections. NOTE: Style 920 and Style 920N housings cannot be mated to each other to achieve a cross connection.

Style 920 and Style 920N Mechanical-T outlets are available with grooved or female threaded outlet. 

Firelock

The Style 922 Outlet-T provides a convenient method of incorporating 1/2, 3/4, and 1"/15, 20 and 25 mm outlets for directly connecting sprinklers, drop nipples, sprigs, gauges, drains and other outlet products. Available for 11/4 through 76.1 mm/32 to 76.1 mm piping systems, Style

922 outlets are UL/ULC Listed, LPCB and FM Approved for branch connections and VdS approved for direct sprinkler connection only on wet and dry systems.

The locating collar engages into the hole prepared in the pipe. When tightened, the assembly compresses the gasket onto the OD of the pipe. The Style 922 Outlet-T is UL/FM rated up to 300 psi/2068 kPa and VdS rated up to 16 bar at the ambient temperatures typical for fire protection systems.

Available in both paint or galvanised.Stock available in 2½” to 6” pipe size, with relevant outlet size to suit.

Product size ranges from 2” to 8” available upon request.
Clear All

Your Recently Viewed Products

Oops! Something went wrong there and we were unable to load the page you requested.

Sign Up